Categories

Contact Us

Zhejiang Jinjiu Rubber Belt Co.,Ltd

Address: West District Development Area, Haiyou Street Sanmen County, Taizhou City, Zhejiang, China

Tel: +86-576-83117102

M/P: +8613968509969

E-mail: Jinjiu@vbeltchina.com

AX Rubber V-Belt, Raw Edge/ Cogged Size From AX 19 Inch To AX 61 Inch

AX Rubber V-Belt, Raw Edge/ Cogged Size From AX 19 Inch To AX 61 Inch

The upper and lower part of the cut-edged belt is covered by wrapping cloth, and rubber is shown at the flank. To improve flexural property, v-belt with tooth-type groove is equipped on the lower layer. General cutting V-belt is characterized by large friction coefficient, small bending loss, and high transmission power. It is capable of absorbing transmission and vibration noise and exhibits fatigue resistance of over 10 times, thus having a long service life. The hectically wound tensile cords are specially engineered, twisted, heat and chemically set and polyester material

Product Details


The upper and lower part of the cut-edged belt is covered by wrapping cloth, and rubber is shown at the flank. To improve flexural property, v-belt with tooth-type groove is equipped on the lower layer.

General cutting V-belt is characterized by large friction coefficient, small bending loss, and high transmission power. It is capable of absorbing transmission and vibration noise and exhibits fatigue resistance of over 10 times, thus having a long service life.



Product features

1. Belt Angle is approximately 40 degrees

2. The belts are constructed of highly engineered and high performance components

3. The helically wound tensile cords are specially engineered, twisted, heat and chemically set and polyester material

Product description

Raw edge notched V-belts give premium belt performance. The belts are constructed of highly engineered, high performance components. The components are made using the latest in belt technology available on a global basis. The “X” in the part number refers to higher load ratings than standard wrapped belts The lower, compression section of the belt is made of highly fiber reinforced, oil and heat resistant, engineered synthetic rubber compound, specifically compounded for excellent wear resistance, cool running, flexibility and has been proven through thousands of hours of testing. The rubber directly surrounding the tensile member cables is also fiber reinforced and compounded for great adhesion to the tensile member cords. The top fabric is a specially woven, synthetic-natural fiber blend. The notches are engineered to allow the belts to have superior flex characteristics on smaller and larger diameter pulleys. The helically wound tensile cords are specially engineered, twisted, heat and chemically set, polyester material.

Royal-original AX Section Cut-edged  V-belt.jpg

Hot Tags: ax rubber v-belt, raw edge/ cogged size from ax 19 inch to ax 61 inch, China, manufacturers, suppliers, factory, wholesale
Related Products

Inquiry